[1]廖文胜△,丁强,王利民.H形钢板固定骶髂关节分离的生物力学评价[J].郑州大学学报(医学版),2013,(04):530.
 LIAO Wensheng,DING Qiang,WANG Limin.Biomechanical assessment on internal fixation with Hshaped reconstruction plate for sacroiliac joint dislocation[J].JOURNAL OF ZHENGZHOU UNIVERSITY(MEDICAL SCIENCES),2013,(04):530.
点击复制

H形钢板固定骶髂关节分离的生物力学评价
分享到:

《郑州大学学报(医学版)》[ISSN:1671-6825/CN:41-1340/R]

卷:
期数:
2013年04期
页码:
530
栏目:
应用研究
出版日期:
2013-07-20

文章信息/Info

Title:
Biomechanical assessment on internal fixation with Hshaped reconstruction plate for sacroiliac joint dislocation
作者:
廖文胜丁强王利民
郑州大学第一附属医院骨科 郑州 450052
Author(s):
LIAO WenshengDING QiangWANG Limin
Department of Orthopedic Surgery, the First Affiliated Hospital, Zhengzhou University, Zhengzhou 450052
关键词:
骶髂关节脱位内固定生物力学H形钢板
Keywords:
sacroiliac joint dislocation internal fixation biomechanics Hshaped reconstruction plate
分类号:
R687.4
摘要:
目的:设计针对骶髂关节脱位内固定治疗的H形钢板,并行生物力学评价。方法:根据解剖特点,设计并制作适用于骶髂关节脱位的H形钢板。收集12个成年防腐骨盆标本,切断骶髂前韧带、骶髂后韧带和骶髂骨间韧带,制作成12对骶髂关节分离模型并随机分为两组,分别使用H形钢板固定和传统的双钢板固定。应用万能生物力学试验机,分别测量侧方和垂直方向上骶髂关节间位移1、2和3 mm时所需要的载荷。结果:在侧方位移1、2和3 mm和垂直位移1 mm时,H形钢板固定组所需载荷均大于传统双钢板固定组(t=4.774,4.202,5.561和2.793,P<0.05)。垂直位移2和3 mm时,两组间所需载荷差异无统计学意义(t=1.362,0.775,P>0.05)。结论:H形钢板应用于骶髂关节分离的固定时,对抗旋转和垂直方向上的初始移位的能力更强,具有更好的力学稳定性。
Abstract:
Aim: To design Hshaped reconstruction plate for the fixation of sacroiliac joint dislocation and to observe its biomechanical characteristics. Methods:Hshaped reconstruction plate was designed based on anatomical features of sacroiliac joint. A total of 12 pelvises of cadaver were achieved,and dissected sagittally through the midline of the sacrum and the pubic symphysis. All ligaments surrounding the sacroiliac joints were removed. 12 pairs of sacroiliac joint dislocation model were obtained and divided into two groups randomly. Six samples(Group A)were fixed with Hshaped plates and 4 screws,another 6 samples(Group B)were fixed with two traditional reconstruction plates and 4 screws. Then biomechanical tests were performed to measure the loading force at the different displacement (1, 2, and 3 mm) in the lateral and vertical direction, respectively. Results: The loading force of Group A was larger than that of Group B at 1,2 and 3 mm displacement in lateral direction and 1 mm displacement in vertical direction(t=4.774,4.202,5.561 and 2.793,P<0.05). Conclusion: The Hshaped reconstruction plate could resist the rotational and vertical displacement better than the traditional plate, and it is more stable when used for fixation of sacroiliac joint dislocation.

参考文献/References:

[1]张景僚,顾立强,谢颍涛.L4、5神经前支和腰骶干与骶髂关节毗邻关系及其临床意义 [J].中国临床解剖学杂志,2004,22(2):148
[2]Ziran BH,Smith WR,Towers J,et al.Iliosacral screw fixation of the posterior pelvic ring using local anaesthesia and computerised tomography [J].J Bone Joint Surg Br,2003,85(3):411
[3]Shazar N,Brumback RJ,Novak VP,et al.Biomechanical evaluation of transverse acetabular fracture fixation [J].Clin Orthop Relat Res, 1998(352):215
[4]刘耀升,郑琦,毕大卫.不稳定骨盆骨折的临床治疗进展 [J].中国矫形外科杂志,2004,12(8):626
[5]Osterhoff G,Ossendorf C,Wanner GA,et al.Percutaneous iliosacral screw fixation in S1 and S2 for posterior pelvic ring injuries: technique and perioperative complications [J].Arch Orthop Trauma Surg,2011,131(6):809
[6]Osterhoff G,Ossendorf C,Wanner GA,et al.Posterior screw fixation in rotationally unstable pelvic ring injuries [J].Injury,2011,42(10):992
[7]Routt ML Jr,Simonian PT,Mills WJ.Iliosacral screw fixation:early complications of the percutaneous technique [J].J Orthop Trauma,1997,11(8):584

相似文献/References:

[1]郭章留.强直性脊柱炎48例骶髂关节影像学分析[J].郑州大学学报(医学版),2009,(04):889.

备注/Memo

备注/Memo:
男,1968年11月生,博士,副主任医师,研究方向:脊柱外科、骨盆髋臼骨折、骨质疏松症,Email:hnzzlws@hotmail.com
更新日期/Last Update: 2013-07-25